Press Releases
Page 1 of 76 | next >>
The Walter TD610 Supreme redefines the thread mill standard
11 March 2026
With the TD610 Supreme, Walter presents a family of thread milling cutters that set new standards in terms of performance and process reliability. The successor to the proven TC610 Supreme not only significantly exceeds its performance and machining times in tests, but also those of the best competitors on the market to date. One of the many reasons for this exceptional performance is the highly ...
Brazed End Mills for High-Speed HRSA Machining
10 March 2026
The industry-leading CERAMIC-SFEED milling line from TaeguTec has now been significantly expanded with the introduction of ceramic brazed end mills and MAXI-RUSH heads. This expansion delivers a comprehensive high-speed milling solution for heat-resistant superalloys in the aerospace, offshore and power generation sectors. The enhanced range addresses the demanding requirements of nickel and co ...
Precision Machining - Starrag presents new 5-axis Heckert X90 machine
9 March 2026
Starrag has launched the Heckert X90, the flagship of its versatile 5-axis machining centre range that delivers exceptional precision and productivity for large-scale manufacturing. Building on the acclaimed Heckert HEC series, the Heckert X90 features a workpiece-side swivel unit, allowing for high-dynamic 5-axis machining from a single clamping position with unparalleled capacity. The Heckert ...
World-Leading Tooling Portfolio at MACH
9 March 2026
Rainford Precision will exhibit an extensive portfolio of cutting tool solutions at MACH 2026, taking place at the Birmingham NEC from 20th to 24th April. Visitors to Stand 112, Hall 6 will discover advanced tooling technology from Union Tool, Louis Bélet, IWATA, Delmeco, Gloor, HOBE, Osawa, DTS, 6C Tools, Swissceramill, ATOM and Hufschmied— all brands at the very cutting edge of micro-machining t ...
Guhring to Premiere New Products at MACH
20 February 2026
Guhring will showcase a range of exciting new cutting tool innovations at the MACH exhibition from the 20th to the 24th April. At Stand 362 in Hall 20, Guhring will present new product lines alongside established, industry-leading ranges featuring a complete selection of milling, threading, drilling, and specialised tools. As part of the display, Guhring will demonstrate its extensive PCD and mi ...
World-Leading Tooling Portfolio at MACH
19 February 2026
Rainford Precision will exhibit an extensive portfolio of cutting tool solutions at MACH 2026, taking place at the Birmingham NEC from 20th to 24th April. Visitors to Stand 112, Hall 6 will discover advanced tooling technology from Union Tool, Louis Bélet, IWATA, Delmeco, Gloor, HOBE, Osawa, DTS, 6C Tools, Swissceramill, ATOM and Hufschmied— all brands at the very cutting edge of micro-machining t ...
New Parting System complete the Walter Groov·tec™ program
11 February 2026
Walter is completing its Groov·tec™ GD grooving tool range with a new offering that makes it universally applicable for all applications in grooving/parting-off, groove turning, and copy turning. Reinforced G5041 and neutral G5042 Parting blades are new to the range and both variants are available with or without integrated precision cooling. The G5111 axial grooving system complements the exci ...
Starrag Present Full Portfolio At MACH
11 February 2026
At MACH, Starrag will showcase a range of new technologies not yet seen in the UK. With numerous exciting innovations introduced over the past 12 months, the Starrag stand at the UK’s premier event will be packed with cutting-edge developments. At the Birmingham NEC from 20th to 24th April, on Stand 320 in Hall 19, Starrag will showcase everything from new machine technologies to its virtual sh ...
Guhring to Premiere New Innovations at MACH
10 February 2026
Guhring will showcase a wide selection of new and established cutting tool solutions at the MACH exhibition, running from 20th to 24th April. Visitors can find Guhring at Stand 362 in Hall 20, where the emphasis will be firmly on practical enhancements in CNC productivity, reliability, and day-to-day machining efficiency. Rather than using technology for technology’s sake, the tools on display ...
New hyperMILL® Innovations at MACH
9 February 2026
From the 20th to the 24th of April, OPEN MIND Technologies will once again be exhibiting at the MACH exhibition at the Birmingham NEC. The CAD/CAM specialist will present the newest advancements from the latest version of its hyperMILL® CAD/CAM suite on Stand 230 in Hall 17. The focus will be on solutions for digital process chains, connected manufacturing, automation, turning, and hyperMILL® VIRT ...
Page 1 of 76 | next >>