Technical Articles
Page 8 of 28 | << previous | next >>
Clamping technology increases productivity for Maas Frästechnik
"With the production of single pieces and small series, there is still a great deal of potential today that is going to waste at the moment", says Stefan Maas, owner of Maas Frästechnik. Primarily when it comes to choosing the clamping devices, there is a great deal of potential that is not being used in his opinion. Together with Martin Schultheis from Qmax Plus Tooling + Engineering and SCHUNK, ...
Motorcycle Dealership Streamlines Service Department With Nederman
Founded in 1980, P&H Motorcycles has grown from a garden shed business to one of the largest motorcycle ‘destinations’ in the South of England. Operating from a 28,000sq/ft facility in Crawley, the growth of the business has recently noted the extension and refurbishment of its motorcycle service and repair department. In refurbishing and enlarging the new service facility from 3,000 to 4,000s ...
ITC Drills Provide 400% Cycle Time Improvement for GPR
In 2016, Surrey based GPR Ltd made its first strides from 3 to 5-axis machining and it was Tamworth cutting tool manufacturer Industrial Tooling Corporation (ITC) that fully supported the subcontractor in selecting the optimal tooling solution for the new machine. Two years after the Matsuura MX-520 was installed to complement the company’s 3 & 4-axis HAAS machining centres and ITC Technical Sales ...
Vetech Reaps Rewards With ITC Cutting Tools
Vetech Product Design & Development Ltd is a subcontract manufacturer that was conceived by engineers with an expertise in the garden equipment sector. When the Buxton based company opened its doors for business in 1994, the founders applied their industry knowledge to win business from the globally recognised Bosch brand. Since its inception, the company has always invested in the latest technolo ...
Tornos Packs a Punch for Plastic Part Producer
Back in 1979, an entrepreneurial greengrocer diversified into selling plastic packaging, which eventually became more profitable than ensuring Staffordshire residents were getting their daily portion of healthy eating. This soon set the foundation of Kenson Industrial Plastics Ltd, a company that evolved from healthy eating to packaging, and then on to the trading of plastic rods and tubes. Ju ...
Print Specialist Yields Benefits of DYSS Digital Cutting Table
There are very few print businesses that can say they have ridden the tide of continuous change and market evolution and remained successful throughout their existence. Thomas Leach Colour is a company that has not only sailed through the industry challenges; it has excelled since its inception almost 120 years ago. Founded in 1901 as a print and stationery business primarily working in the Oxf ...
Tenable Turns to MultiSwiss For Productivity Beyond Sliding Heads
Almost 78 years after Tenable Screw was founded by a Swiss watchmaker as a manufacturer of screws, the company has become one of the UK’s largest subcontract manufacturers of turned parts. Remaining deeply loyal to its roots, Tenable has unparalleled expertise in turned component production, something that is evident by the company’s relentless growth. With three manufacturing sites in Marlbor ...
BIG KAISER Tightens Its Grip On UK Marketplace With Partner ITC
Three years ago, Industrial Tooling Corporation (ITC) made a strategic decision to become the UK agent for the BIG KAISER brand of precision tooling. Since signing that agreement, sales of the BIG KAISER product lines have more than trebled in the UK. The UK has rapidly become the 5th largest European market for BIG KAISER and establishing this market position in such a short period of time is ...
Alitech Races to Success With ITC
As a subcontract motorsport machine shop, Alitech Precision Ltd is a company that is rapidly evolving and this is credit to its aggressive investment programme, enthusiasm and love for all things motorsport. Since its inception little over three years ago, the Silverstone Company has purchased three HAAS machining centres, OPEN MIND CAM software, a simultaneous 5-axis Spinner machining centre a ...
Pocket Rocket Goes Even Faster With hyperMILL
When Vetech Product Design & Development Ltd first opened its doors for business in 1994, the founders of the Buxton Company exploited their expertise in the garden equipment sector to win business from the globally recognised Bosch brand. Providing design, consultancy, subcontract manufacture and mould & die tooling, the Derbyshire business has retained Bosch as a core customer whilst branching i ...
Page 8 of 28 << previous | next >>
