Press Releases
Page 43 of 69 | << previous | next >>
NTK Sticks It To The Competition With New Boring Tools
6 March 2014
Profiling, grooving and boring operations for small component turning has now been significantly simplified by NTK with its new Stick Duo range of double ended solid carbide boring bars. With the majority of world's sliding head turning centres manufactured in Japan, NTK has worked closely with these manufacturers to develop the new Stick Duo boring bars that can dramatically reduce cutting to ...
Chuck Jaw Changes in Seconds With Schunk
4 March 2014
With a change-over time of 5 seconds per jaw, the new SCHUNK PRONTO quick jaw change system offers remarkably fast set-up times for all standard lathe chucks with fine serrations of 1/16’’ x 90° and 1.5mm x 60°. The quick-change retrofit set from the competence leader for clamping technology and gripping systems consists of supporting and changing jaws. The new innovation is suitable for OD cla ...
ITC Takes Aluminium Machining To Next Level With New Generation of Cutters
4 March 2014
With an already formidable line of aluminium end mills in its armoury, Industrial Tooling Corporation (ITC) has added to its product range with the launch of the new 3091 Cyber Series range of three flute end mills. The long shank end mill line has been created to give the end user greater reach for machining cavities and difficult to access surfaces whilst delivering maximum rigidity for high mat ...
The Most Powerful Turning Machine on the Market
3 March 2014
During EMO, Tornos unveiled the EvoDeco 32 machine, a lathe with a remarkable design that boasts surprising power both for spindle and counter spindle machining. To demonstrate the capabilities of this powerhouse, that will be shown at MACH 2014 on Stand 5260, Tornos has machined a typical component from 303 Stainless Steel. Simple in appearance, the part is machined from a 32mm diameter bar. T ...
Unicut To Demonstrate Infinite Possibilities at MACH 2014
26 February 2014
Following on from its remarkable success at MACH 2012, Unicut Precision is relishing the opportunity to highlight its capabilities at MACH 2014. On Stand 5592, the Welwyn Garden City manufacturer will be showcasing why it is the benchmark for turned and mill/turn component production with the theme of 'Infinite Engineering Solutions'. This years' theme has been inspired by a recent ...
Hydrafeed Raises the Bar For MACH 2014
24 February 2014
To improve the productivity and set-up times for bar turners at MACH 2014, Hydrafeed will be introducing its new MSV65 barfeeding system on Stand 5030. The new MSV65 and the larger and already renowned MSV80 will both be receiving their exhibition debut at MACH 2014. Both the new MSV80 and MSV65 barfeeding systems will be introduced at MACH alongside established products such as the MV65 barfee ...
SCHUNK Rotary Unit is New Benchmark For Cycle Time and Frequency
24 February 2014
The new SRU-Mini-Speed rotary unit from SCHUNK sets a new benchmark for high-performance assembly in terms of cycle time and frequency. With 14 module sizes, the new rapid modules from SCHUNK, the competence leader for clamping technology and grip-ping systems provides swivel times from 0.48seconds. If lightweight parts are handled with the unit, more than 4,000 cycles per hour can be executed ...
Rainford to Show the UK's smallest drills at MACH
12 February 2014
Rainford Precision has now taken orders for drills with the miniscule diameters of 0.015, 0.025 and 0.030 mm, which will be at MACH 2014 on Stand 5219. The micro machining specialist has supplied the high precision drills from Iwata Tool to a UK customer who is manufacturing prototype components for a development project in the electrical measurement sector. The new range of Iwata Tool carbide ...
acs To Exhibit Environmentally Friendly Filtration Technology at MACH
12 February 2014
At MACH 2014 on Stand 5245, acs (Air Cleaning Systems) will exhibit equipment from its product range to reflect the two halves of the business with industrial air cleaners for coolant mist control and downdraught filter benches for dust control. In a world of increasing energy and maintenance costs, acs will showcase the energy saving and low maintenance benefits of both ranges. With regard t ...
Part Finishing Issues? Visit Ellesco at MACH for a Consultation and Demo
10 February 2014
The Ellesco exhibition stand at MACH 2014 will mark the re-branding of the company and also be the launch-pad for the company to promote a variety of innovative new surface finishing and deburring solutions. On Stand 4510, Ellesco will be keen to emphasise the importance of high quality surface finishing and efficient deburring solutions and the added value it offers manufacturers, whether they ar ...
Page 43 of 69 << previous | next >>