Press Releases
Page 39 of 69 | << previous | next >>
Flexible Precision Toolholder for Automated Tool Grinding
3 July 2014
The new generation of SCHUNK PRISMO tool grinding toolholders has been developed to provide greater efficiency during production grinding and re-sharpening of cutting tools. This is because the new PRIMSO3 directly clamps every shank diameter between 3mm and 20mm automatically without using collet chucks or intermediate sleeves at a run-out and repeat accuracy of less than 0.005mm. The tool s ...
ITC Targets European Distributors
2 July 2014
The ongoing growth of Industrial Tooling Corporation (ITC) Ltd and its successful participation in a number of recent European exhibitions has recently resulted in the Tamworth based cutting tool specialist appointing new distributors throughout Europe. ITC has underpinned this entry into new markets by investing heavily in new technology to provide additional capacity, develop new tool geometries ...
Vollmer Develops Tool Grinding in a New Dimension
2 July 2014
The launch of the new VGrind 160 grinding machine for solid carbide tools marks a paradigm shift for Vollmer, as it now enters the global market for processing solid carbide cutting tools. As its first entry into the grinding of solid carbide cutting tools, Vollmer has approached the process from a radically new technological point of view. Unlike alternate machines, the new VGrind 160 utilise ...
Unicut Precision Wins Prestigious Eaton Hydraulics Contract
28 June 2014
After four years as a subcontract machining supplier to the globally acclaimed hydraulic power division of the Eaton Corporation, Unicut Precision has won a 4 year contract worth over £3m to supply cartridge bodies. In 2013, the Havant Division of the Eaton Corporation set about streamlining its supplier base by asking its specialist hydraulic subcontract suppliers to re-tender for the next lon ...
Floyd Solves Platen Tool Coolant Supply Feed Issues for Sliding Head Lathes
28 June 2014
Delivering coolant directly to the cutting tools in the platen of a compact sliding head lathe has until now, been somewhat of a challenge. However, with the new MultiDec Lube system from Floyd Automatic, this challenge has now been overcome. With Swiss type sliding head lathes becoming ever more productive and materials increasingly difficult to cut, downtime caused by poor tool life and swarf ...
NTK Introduces New Turning Line
28 June 2014
To fully optimise all tooling positions and maximise the potential of sliding head turning centres, NTK Cutting Tools has now developed its new DS line of toolholders and sleeves. The key feature of this new innovation is its ability to enable the end user to use turning tools in the vacant drilling sleeves, thereby significantly increasing the number of turning tool positions available. The i ...
ITC's New Line Has a Ball With Steel
28 June 2014
For the profile machining of steel and other ferrous materials, Industrial Tooling Corporation (ITC) has now launched its new 4032 standard length and 4042 long reach Cyber Series of ball nosed end mills. The innovative new end milling lines have been developed by the Tamworth based cutting tool specialist to improve performance, tool life and productivity when machining a wide variety of ferrous ...
OPEN MIND Revamps its Website
10 June 2014
OPEN MIND Technologies has creatively redesigned its website, which is available at www.openmind-tech.com. The leading CAM/CAD software developer has taken current viewing habits and navigation standards into account and makes more extensive use of videos. OPEN MIND has invested in social media in recent times, but the CAM/CAD provider has now completely redesigned its website. Early visitor f ...
ITC Simplifies Composite Machining With New Routers
9 June 2014
With carbon fibre composite materials increasingly commonplace in the aerospace and motorsport industries, Industrial Tooling Corporation (ITC) has now launched its new 9001 Cyber Series of Multi-Flute routers for the highly productive and efficient machining of composites. As a leading supplier to these prestigious sectors, ITC has added to its range of carbon fibre and synthetic composite cu ...
Schunk Starter Kits Make a Case for Success
6 June 2014
For high volume material removal, the Schunk TENDO-E compact has long been the toolholding solution of choice. To extend the benefits of the industry leading toolholder system to a wider audience, Schunk has now launched a series of TENDO-E compact starter kits, so machine shops can experience the benefits of the TENDO-E compact first hand. Only available for a limited period of time, the new s ...
Page 39 of 69 << previous | next >>