Press Releases
Page 47 of 69 | << previous | next >>
New 90 Degree “Tung-Tri” Milling Range From Tungaloy
4 November 2013
To improve the performance of shoulder milling and positive milling processes, the Tungaloy Corporation has now introduced its exciting new Tung-Tri Series of 90 degree indexable insert end mills. Developed to give end users an economical solution when shoulder milling, results have shown that new Tung-Tri can improve tool life by 60% and increase productivity. The Tung-Tri is available with a ...
The Workshop of Tomorrow Available Today With Tornos
23 October 2013
At EMO 2013 Tornos unveiled its new programming software for its machines that will enable them to operate without assistance from the renowned TB-DECO system. Already in use by those who bought the first SwissNano machines, the new ISIS software is much more than just an ISO editor with a pleasing design. It also enables direct communication with machines and allows their status to be monitored. ...
Standardized Long-Stroke Gripper with Carbon Fiber Housing
22 October 2013
The CGH long-stroke gripper from SCHUNK is a milestone in handling. For the first time SCHUNK, the competence leader for clamping technology and gripping systems has succeeded in standardizing a light-weight gripper with Carbon Fiber Composite (CFC) housings. The versatile module convinces in terms of energy-efficiency and economic efficiency by increasing the dynamics of existing systems or enabl ...
Tornos Event Delivers Results
18 October 2013
For those unable to make it to EMO in September, the Tornos Open House Event at its Coalville headquarters proved a welcome opportunity to view the new machine launches from the Swiss turned parts specialist. Jointly hosted with Matsuura and supported by technology partners such as Fanuc Automation, Delcam, Sys, Zoller Floyd Automatic Tooling, Mecwash, Lehmann 5-axis machining, Rainford Precision ...
Leader CNC Announces Open House Dates
18 October 2013
Following the successful launch of a number of new machine tool innovations at EMO from Kitamura, Leader CNC has announced it will be holding an open house event at its Nuneaton headquarters from the 5th to the 7th of November. The purpose of the event will be to promote the new 'G' range of machines from the leading Japanese machine tool manufacturer. The new machines to be shown in th ...
Multi-Purpose End Mills from ITC
9 October 2013
Now available in the new Widia Slimline Catalogue from Industrial Tooling Corporation (ITC) is the general purpose Hanita 6606 Series of end mills for roughing operations. The innovative all-rounder from ITC is ideal for high stock removal machining of hard materials at low feeds. As the UK agent for Widia, ITC is offering this innovative 6606 range of HSS-M42 end mills that are TiAlN coated fo ...
Flexible Multi-Clamping Vice From Schunk
8 October 2013
The new KONTEC KSM2 multi clamping vice from SCHUNK is a reli-able and precise all-rounder for stationary workpiece clamping. In or-der to efficiently use on 3, 4, or 5 axis machines, it can clamp several parts at the same time that may be located next to each other. With slim jaws that do not protrude, the KSM2 minimises interfering contours to allow a particularly high part density with optim ...
Tungaloy Introduces New Milling Range
8 October 2013
For highly productive and economical milling, the Tungaloy Corporation has now developed its new DoPent Series of face milling cutters. The extremely rigid line of cutters offer productivity levels beyond that of alternate tools with its innovative new insert inclination that reduces cutting forces and improves cycle times. The new DoPent range incorporates a double sided pentagonal insert that ...
Tornos’ New Swiss ST26 CE Arrives in Europe
4 October 2013
Making its world exhibition debut at IMTS in September 2012, followed by DMP 2012 in China, the Tornos Swiss ST26 was developed as a simple machine covering a wide range of requirements for the Asian and American markets. Building on its success in these markets, the company has decided to produce a CE version for Europe. Equipped with 7-axes, the newcomer will be positioned as a direct competi ...
SCHUNK Receives Award from Robert Bosch
4 October 2013
Robert Bosch GmbH has honored SCHUNK, the competence leader for clamping technology and gripping systems with a 'BOSCH Global Supplier Award' in the category 'Indirect Purchase'. BOSCH awards this prize, to those companies who show superior performance in the production and delivery of products or services. "The Bosch Global Supplier Award is an award and incentive at the same ...
Page 47 of 69 << previous | next >>