Press Releases
Page 51 of 69 | << previous | next >>
ACT Hits The Spot At EMO 2013
14 June 2013
At Europe's showcase manufacturing event, leading Japanese cutting tool manufacturer Nine9, will be launching a number of new innovations. The EMO event taking place in Hanover in September will note the Nine9 range extended with the launch of the new I-Center indexable centre drill and the W-Spotting tool for spotting and chamfering tapped holes. Available in the UK through Hinkley based Adva ...
Tornos To Show New Innovations at EMO
14 June 2013
At the EMO show this year, Tornos will be taking innovation to a new level with a number of new product launches. The Hanover event will see the Swiss turning specialist introduce its new EvoDeco 32, the Almac CU1008, the Almac SwissNano F, the SwissNano and the award winning MultiSwiss 6X14 as well as a number of new machines yet to be announced. The new EvoDeco 32 now gives the EvoDeco machin ...
Blum Presents New BG60 Bore Gauge
13 June 2013
Blum-Novotest, a leading supplier of innovative high-quality measuring and testing technology has now launched its new BG60 bore gauge. The measuring system is used for the mass production of workpieces with close-tolerance bores. Even in a machining centre, the BG60 contributes significantly to improved productivity and continuous quality assurance. "The BG60 bore gauge is ideal when it comes ...
ITC Launches Milling All-Rounder
12 June 2013
Industrial Tooling Corporation (ITC) has now launched the new Hanita 4002, 4003 and 4004 series of end mills from Widia. Developed for general machine shops aiming to improve their machining performance on a wide range of materials, the new two, three and four flute end mill series deliver remarkable productivity levels and diversity. Manufactured from a sub-micron grain carbide with a TiAlN co ...
Tornos Gives A Competitive Edge With New Machining Centres
12 June 2013
New linear guide rails developed by CNC machine-tool manufacturer Almac, ensure that Swiss watch-makers that use their ultra precise 3 to 5-axis machining centres produce better quality components. When this is coupled with the long-standing use of Alphacam, one of the most popular CAM systems in Switzerland’s watch industry; it’s easy to see why Almac are a leading supplier of high precision mac ...
Veteran of sharpening technology honoured by Ligna
11 June 2013
This year, Vollmer took part in the Ligna international woodworking fair in Hanover for the 20th time. For this reason, the Swabian specialist for sharpening and eroding machines was honoured with a certificate and a thank you speech. Vollmer therefore ranks among the veterans of Ligna and has been part of every trade fair since 1975, the year it was established. "Vollmer is one of the few com ...
Tornos Has The Tablet for Technophobes
29 May 2013
The SwissNano marks a break from the rest of Tornos' range of machine tools in terms of the design and concept of the machine. Its ambitious aim is to be fully manufactured in Switzerland whilst meeting very stringent cost requirements, so as to counter Japanese and Korean competition, often manufactured in low-cost economies. The SwissNano is a demonstration of the performance that the Sw ...
ACS Introduces New Downdraught filter bench brochure
14 May 2013
As a market leader in media filtration systems, Air Cleaning Systems (acs) has now launched its new downdraught filter bench brochure. The FB range enables end users to reduce energy consumption with an optional compressed air control unit that automatically powers down the bench when the connected air tools are not in operation. A flow sensor that is incorporated into the compressed air cont ...
Vollmer UK Increases Service Staff Levels
13 May 2013
To coincide with the increase in business activity at Vollmer UK, the Sandiacre company has now employed three new members of staff, taking employee levels from 9 to 12, a 25% increase. The appointment of Donald Draper at the start of January 2013 and Kevin Jerabek in November 2012 as service engineers will bolster the company's commitment to its service and support of the expanding customer b ...
ITC Demonstrates Expertise at Sign UK 2013
12 May 2013
This year's Sign & Digital exhibition proved a remarkable success for Industrial Tooling Corporation (ITC) as it once again launched a number of new innovations from its Stand. As a market leading supplier of high quality cutting tool solutions to the Sign Industry, ITC has continued its relentless development of new products throughout 2012 and this was noted in the incredible enquiry and or ...
Page 51 of 69 << previous | next >>